Low loader sizes: how much can a low loader carry?
As of November 2026, a 26 ft rigid beavertail carries about 12–13.5 tonnes, a semi low loader about 28 tonnes and a 3-axle low loader up to about 50 tonnes. Over 44 tonnes in total or wider than 2.9 metres, a load is abnormal and the haulier must give notice.
Get real quotes for this jobFree, no account needed. Matching suppliers call or WhatsApp you.
Sources and dates: end of this guide.
Payloads and deck heights of beavertails, semi low loaders, step frames and low loaders, which one your machine needs, and the UK width, weight and notice rules.
Plant lorries and trailers by size
Makers' and hauliers' own specifications, read in November 2026. Payload depends on the exact lorry or tractor unit, so check with the haulier for your machine.
| Type | Carries about | Deck or load height |
|---|---|---|
| 7.5 tonne beavertail | 3–3.5 tonnes | Ramps and winch (Maun Motors) |
| Rigid beavertail, 26 ft, 3 or 4 axles | 12–13.5 tonnes; a 4-axle about 18 tonnes | Travel height 3.70–3.85 m (Truck and Crane, Burman Plant, Tomato Plant) |
| Semi low loader, 3 axles | About 28 tonnes | Bed 1.10 m from the ground (Truck and Crane) |
| Step frame trailer, 2 / 3 / 4 axles | About 26 / 29 / 58 tonnes | (Andover Trailers) |
| Low loader, 2 axles | Up to 25 tonnes | Lower deck about 300 mm (John Hudson) |
| Low loader, 3 axles | Up to about 50 tonnes | Lower deck about 420 mm (John Hudson) |
| 4-axle artic with extending trailer | Up to about 86 tonnes | Escorted; load height up to 4.5 m (Tomato Plant) |
Which one for your machine
| Machine | Usually goes on |
|---|---|
| Micro and mini digger, small dumper | 7.5 tonne beavertail or plant trailer |
| Midi digger (5–8 tonnes), backhoe loader, telehandler | Rigid beavertail |
| 13–25 tonne excavator, dozer, roller | Semi low loader or step frame |
| 30 tonnes and over, cranes, crushers | Low loader, often as an abnormal load |
Tall machines need a low deck: the lower the deck, the taller the machine can be without going over bridge heights. Give the haulier the machine's travel height.
UK limits for a normal load
- Width: 2.55 metres for a lorry or trailer (Road Vehicles (Construction and Use) Regulations 1986, regulation 8).
- Weight: 44 tonnes gross for a 6-axle articulated lorry.
- Height: there is no general legal height limit, but a lorry over 3 metres must show its height in the cab, and a load over 5.1 metres means contacting the electricity companies along the route.
- Abnormal load: over 44 tonnes in total, over 10 tonnes on a non-driving axle (11.5 tonnes on a driving axle), wider than 2.9 metres or a rigid length over 18.65 metres (National Highways).
Abnormal load categories and notice
Under the special types rules (STGO), the haulier notifies the police and the highway and bridge authorities through ESDAL:
| Category | Up to | Notice |
|---|---|---|
| Category 1 | 46 tonnes on 5 axles, 50 tonnes on 6 | 2 working days |
| Category 2 | 80 tonnes, at least 6 axles, 12.5 tonnes an axle | 2 working days |
| Category 3 | 150 tonnes, 16.5 tonnes an axle | 5 working days |
By width: over 3 metres, 2 days' notice to the police; over 3.5 metres, an attendant; over 5 metres, a VR1 permit; over 6.1 metres or 150 tonnes, a special order. Book plant moves early enough for this.
What to tell the haulier
- Make, model, weight, width and travel height of the machine, with a photo
- Whether it runs and can be driven on, and which attachments go with it
- Both postcodes, and whether an artic can get in at each end
- See low loader hire cost for prices.
Plant & Haul doesn't set prices or take a share of the job: operators quote you directly, and the real price depends on your job.
Questions
How much can a low loader carry?
A 2-axle low loader carries up to about 25 tonnes and a 3-axle up to about 50 tonnes; specialist multi-axle trailers carry much more as abnormal loads. A semi low loader carries about 28 tonnes.
How much can a beavertail carry?
A 7.5 tonne beavertail carries about 3–3.5 tonnes, enough for a mini digger; a 26 ft rigid beavertail about 12–13.5 tonnes.
What is the difference between a beavertail and a low loader?
A beavertail is a rigid lorry with a sloping rear deck and ramps, for machines up to about 13 tonnes. A low loader is an articulated trailer with a deck close to the ground, for heavier and taller plant.
How wide can a load be without notice?
Up to 2.9 metres. Wider than that, the load is abnormal: the haulier gives the police notice, and over 3.5 metres needs an attendant.
Sources, checked 15 November 2026
- Maun Motors: 7.5 tonne beavertail plant lorry
- Burman Plant: beavertail lorry hire
- Truck and Crane: beavertails and plant lorries
- Tomato Plant: rigid beavertail
- Truck and Crane: step frame low loader trailers
- Andover Trailers: step frame trailers
- John Hudson Trailers: low loader trailers
- Tomato Plant: 4-axle artic
- legislation.gov.uk: Road Vehicles (Construction and Use) Regulations 1986, regulation 8 (width)
- GOV.UK: engineering plant vehicles (height notices)
- National Highways: abnormal loads and the ESDAL system
- DVSA: special types enforcement guide
Read next
- Low loader and plant transport: cost, and when a load is abnormalWhat moving a mini digger or an excavator costs, how hauliers charge, and the UK abnormal load limits and notice periods.
- Digger and driver hire: day rates by machine sizeWhat a digger with its driver costs a day, from micro and mini diggers to 360 excavators, what the day rate includes, and what costs extra. Also called man and digger, or operated plant hire. Plus site dumpers with a driver: sizes and safety.
- HIAB hire cost: half day, full day and single liftsWhat a HIAB lorry and driver cost for a half day, a full day or one delivery with a lift, and what decides the price. Also called a lorry loader or crane lorry.
Post a plant transport request Low loader hire & plant transport in the UK