plant&haul

Grab lorry sizes: how many tonnes does a grab lorry take?

By the Plant & Haul team · Checked

As of November 2026, an 8-wheel grab lorry takes about 16 tonnes or 12–15 m³ a load, a 6-wheel about 10–14 tonnes and a 4-wheel about 7–9 tonnes. It needs about 3.5 m of width to get in and about 5.8 m of clear height to work the grab.

Get real quotes for this jobFree, no account needed. Matching suppliers call or WhatsApp you.

Sources and dates: end of this guide.

What a 4, 6 and 8-wheel grab lorry carries in tonnes and cubic metres, how far the grab reaches, and how much width and height it needs to get in and work.

Grab lorry sizes at a glance

Grab hire firms' own published figures, read in November 2026. Figures vary by lorry and crane, so check with the operator.

Grab lorry sizes at a glance
Grab lorryCarries aboutRoom8-yard skips' worth
4-wheel (18 tonnes gross)7–9 tonnesAbout 9 m³About 1½
6-wheel (26 tonnes gross)10–14 tonnesAbout 13 m³About 2
8-wheel (32 tonnes gross)About 16 tonnes, up to 18About 12–15 m³About 2–3

Gross weight is the lorry plus its load; an 8-wheel grab lorry weighs about 16 tonnes empty. Soil, clay and hardcore usually reach the weight limit before the lorry is full.

How far the grab reaches

  • About 4–6 metres is typical from the side of the lorry; the pile should be within that distance of where the lorry can park (The Waste Group, MyBuilder).
  • Up to about 8 metres on some 8-wheel lorries (WasteKing); grab cranes are built with outreach up to about 9.6 metres (Palfinger Epsilon M120Z), but they lift less the further they reach.
  • Sideways only on some lorries: one Dorset firm's grab reaches about 3 metres either side and not over the cab or the back.

Will it get in?

Will it get in?
CheckWhat a grab lorry needs
WidthAbout 2.75 m (9 ft) for the lorry; about 3.35–3.5 m (11 ft) with mirrors and space either side
LengthAbout 9 m (29 ft) for an 8-wheeler
HeightAbout 3.8 m clear to drive in, and about 2 m more above that to work the crane: about 5.8 m
OverheadCables, phone lines and low branches can stop loading; some firms visit first
Where it parksDirectly alongside the pile, on firm ground

What to tell the operator

  • What the waste is, and roughly how much (use the muck away calculator)
  • How far the pile is from where the lorry can park, and the width of any gate or gap
  • Anything overhead, and whether the road is narrow or has parking

Plant & Haul doesn't set prices or take a share of the job: operators quote you directly, and the real price depends on your job.

Questions

How many tonnes does a grab lorry take?

An 8-wheel grab lorry takes about 16 tonnes a load (some up to 18), a 6-wheel about 10–14 tonnes and a 4-wheel about 7–9 tonnes.

How many cubic metres is a grab lorry?

About 12–15 m³ for an 8-wheeler, about 13 m³ for a 6-wheeler and about 9 m³ for a 4-wheeler, depending on the body.

How wide is a grab lorry?

About 2.75 m (9 ft) without mirrors. Allow about 3.5 m of access so it can get in safely with its mirrors.

How far can a grab lorry reach?

Usually about 4–6 metres from the side of the lorry; some 8-wheelers reach about 8 metres, lifting less at full reach.

Sources, checked 15 November 2026

Read next

Post a grab hire request Grab hire & muck away in the UK