Tipper sizes: how much does an 8 wheeler tipper carry?
As of November 2026, an 8-wheel tipper carries about 20 tonnes (32 tonnes gross), a 6-wheeler about 15–16 tonnes and a 4-wheeler about 10 tonnes. An 8-wheeler is about 9.5–9.8 m long and needs about 3.05 m between walls because of its mirrors.
Get real quotes for this jobFree, no account needed. Matching suppliers call or WhatsApp you.
Sources and dates: end of this guide.
Payload, gross weight, length, width and height of 4, 6 and 8-wheel tippers and artic tippers, what fits through a gate, and how a tipper differs from a site dumper.
Tipper sizes at a glance
Hauliers' and makers' published figures, read in November 2026. Payload is what the tipper carries; gross weight includes the lorry itself.
| Tipper | Carries about | Gross weight | Size (length × width × height) |
|---|---|---|---|
| 4-wheel (4x2) | 10 tonnes | 18 tonnes | 6.9 × 2.5 × 3.4 m |
| 4-wheel with lifting axle | 14.5 tonnes | 24.5 tonnes | |
| 6-wheel (6x4) | 15–16 tonnes | 26 tonnes | 8.2 m long, 3.5 m high |
| 8-wheel (8x4) | 20 tonnes (one maker's spec: 21.9) | 32 tonnes | 9.5–9.8 × 2.5 × 3.5–3.8 m |
| Artic tipper | 29 tonnes | 44 tonnes |
An 8-wheel tipper body holds about 15–16 m³; heavy material such as wet clay reaches 20 tonnes before the body is full.
Will an 8-wheel tipper get in?
- Through a gap: about 2.75 m (9 ft) on level, straight ground; about 3.05 m (10 ft) between walls or pillars, because of the mirrors.
- Tipping height: the body rises up to about 9 metres on an 8-wheeler, so check for cables and trees where it will tip.
- Loading: a tipper has no grab, so it needs a digger on site; one firm says an 8-tonne digger or bigger, loading in about 30 minutes.
- Tight sites: a 4-wheel tipper (about 2.5 m wide) is offered for sites a bigger lorry can't reach.
Tipper or site dumper?
A tipper is a road lorry that carries material to and from the site. A site dumper is a machine that moves material around the site and normally stays there. See digger and driver hire for dumpers with a driver, and tipper hire with driver for prices.
Questions
How much does an 8 wheeler tipper carry?
About 20 tonnes. Its gross weight is 32 tonnes, and the lorry itself weighs about 10–12 tonnes.
How many cubic metres is an 8 wheel tipper?
About 15–16 m³ for a standard body; heavy material reaches the 20-tonne limit first.
How wide is a tipper lorry?
About 2.5 m for the body, about 3 m with mirrors; allow about 3.05 m between walls.
What is the difference between a 6 wheeler and an 8 wheeler tipper?
A 6-wheeler carries about 15–16 tonnes and is about 8.2 m long; an 8-wheeler carries about 20 tonnes and is about 9.5–9.8 m long.
Sources, checked 16 November 2026
- Breedon Special Aggregates: delivery vehicles
- MQP: transport and vehicle information
- Smiths Bletchington: our fleet
- Renault Trucks UK: C440 8x4 steel tipper specification (28 January 2025)
- Portland Skips: tipper hire questions, Dorset
- J9 Aggregates: muck away, West Midlands
- HSE: dumpers on construction sites
Read next
- Tipper hire with driver: cost per hour, day and loadWhat an 8-wheel tipper and driver costs by the hour, the day and the load, what a tipper carries, and when you need a grab lorry instead. Also called a tipper lorry or tipper truck, and not the same as a site dumper.
- Muck away cost per load, and a calculator for your digWhat muck away costs per load for soil, clay, brick and green waste, why the material matters so much, and how many loads your dig will make.
- Digger and driver hire: day rates by machine sizeWhat a digger with its driver costs a day, from micro and mini diggers to 360 excavators, what the day rate includes, and what costs extra. Also called man and digger, or operated plant hire. Plus site dumpers with a driver: sizes and safety.
Post a tipper hire request Tipper hire with driver in the UK